Oya Incense Set

<Oya Incense Plate>
Size：W150×D94×H9mm
Weight：185g
Material：Oya stone
Finish：Clear coating
Made in Japan

<poly incense holder>
Size：W25×D25×H20mm
Weight：45g
Material：Bronze
Made in Japan

This incense set consists of an incense plate made of Oya stone and a poly incense holder made of bronze. Oya stone has excellent fire and heat resistance and can withstand heat of over 1000 degrees Celsius. That is why the material is often used in kamados, stone kilns and incinerators. The incense holder takes advantage of texture of bronze, so that you can enjoy the aging process of bronze. The polyhedral shape of the holder allows you to stick the incense at the angle of your choice. Suitable for stick-type incenses.

• Be sure that the tip of the incense stick is visible within the boundaries of the holder.

This product is a set of incense plate and incense holder. Do not use this product for any purpose other than its intended use.

• Keep out of reach of children and pets.
• Do not expose to hard or sharp objects. The surface may be scratched.
• Do not drop or hit against hard objects. The surface may be chipped or damaged.

<Oya Incense Plate>

• The product is fire-resistant, but may discolour if exposed to direct fire or at close proximity to a fire.
• The coating on the surface may peel off due to friction or usage.
• Small pieces of stone may fall off.
• The texture and colour may change as time goes on or depending on the usage.
• Dragging the product may cause damage to tables and other objects. Use attached adhesive pads if necessary.
• As the product is made from natural materials, there may be individual differences in the pattern and texture of the stone.

<poly incense holder>

• Use and store in a safe and level area, and away from flammable materials.
• Do not use the product in strong winds, near curtains or other flammable materials.
• Don’t leave the incense stick burning in one room. Always keep them in your sight

<Oya Incense Plate>

• Remove dirt with a soft brush.
• Do not scrub with a scouring brush or sponge.
• Wash with water, if necessary.
• Dry the product in the sun.

<poly incense holder>

• Wipe with a soft wet cloth and then dry with a dry cloth.